The single radio or dual radio 8200 Mesh Router creates a self-configuring and self-healing wireless mesh network over Single or Dual 5 GHz, 4.9 GHz, 2.4 GHz, or 900MHz spectrums. The Dual mesh configuration achieves the highest throughput and lowest latency across multiple hops. The 8200 Dual is a “third generation” mesh, where multiple non-interfering radios are used to create a clear pathway to every point in the mesh. When correctly provisioned, the maximum 802.11n transmission rate of 300 Mbps is maintained from end to end.

The SuperMesh 8200 is a high-powered dual 300-700mWatt outdoor router with weatherized Ethernet and power-out connectors for co-locating client Access Points, security devices, or other network hardware on the pole. A single PoE connection powers both the mesh and attached AP. Multiple SuperMesh's automatically create a wireless network that is reliable, efficient, and responsive to environmental changes, reducing support calls and onsite visits.

 

Extended Network Range - Benefit of High RF Output

Better signal strength and throughput will result from using 500mW outdoor Access Point, with less then 5ft. coax cable to your antenna.  This will allow a bigger and better safety margin against interference, and will allow more flexibility in placement of your outdoor access point.  Reach more clients, with less equipment.

Hardware

(1) configurable 300-700 mw radio
(2) 10/100 Ethernet LAN ports (1 w/ POE IN, 1 w/ POE OUT)
Powered by poe-1 injector
NEMA-style enclosure with moisture proof seals
PoE Output
10.8 x 8.3 x 4 In. / 3.6 Lbs.


Security and Management Features

SNMP MIB II
Payload encryption
VPN IPSEC in each Node
VLAN and VPN passthrough
40(64) or 128 bit WEP
web based management
remote firmware upgrade


Certification and Approval

CE Mark
FCC part 15 class B
VCCI Class B
UL

One year parts and labor