Features:
Integral High Gain Antenna

WEP/WPA Encryption

Built In Web Configuration

54Mbps Transfer Rate

Can be used to connect 2 locations

Weather proof housing

Requires PoE adapter.  Not included.  Click here for the Linksys PoE adapter.

High Speed Wireless Access for all Exterior Environments!

Click for WAP200E Replacement.

This outdoor access point will enable you to extend your network outdoors, where Wi-Fi coverage has limited or no connectivity.  Simply connect this outdoor access point via the PoE adapter (not included), to your LAN, and your Wireless Coverage area will increase by up to 50%.

It's also perfect for use as a bridge, a kind of "cable-less cable" to connect remote areas together. Maybe your warehouse is in a separate building from your offices. Or maybe you need to connect the separate buildings of a college campus. With one Wireless-G Exterior Access Point on each building, you're connected at 54Mbps – with no cable to run. The exterior-rated case protects the access point, and contains an internal antenna.

To protect your data and privacy, the Wireless-G Exterior Access Point supports both Wired Equivalent Privacy (WEP) and the industrial-strength wireless security of Wi-Fi Protected Access™ (WPA), encoding all your wireless transmissions with powerful encryption. The MAC Address filter lets you decide exactly who has access to your wireless network, and advanced logging and emailed intrusion alerts keep you appraised. Configuration is a snap with the web browser-based configuration utility.

The Linksys Wireless-G Exterior Access Point is the best way to add wireless access to the outdoor areas of your home or business.

 

Product Name	Wireless G Exterior Access Point w/PoE
Product Type	Wireless Access Point
Product Model	WAP54GPE
Number of Ports	1
Input Voltage	48 V DC
Power Source	AC Adapter
Dimensions	8.07 " Height x 6.42 " Width x 2.17 " Depth
Wireless Transmission Speed	54 Mbps
Management	Built-in Web UI for easy browser-based configuration 802.1q VLAN 802.1p QoS Priority SNMP Version 1, 2c Event Logging Firmware upgradeable through Web-browser
Certifications & Standards	FCC IC-03 CE Wi-Fi Certified IEEE 802.11b IEEE 802.11g IEEE 802.1q IEEE 802.1p IEEE 802.3af IEEE 802.3u IEEE 802.11i IEEE 802.11e
Modulation	802.11.b DSSS 802.11.g OFDM
Channels	11 ChannelNorth America 13 ChannelETSI, Japan
Transmission Speed Details	54Mbps Auto-fallback IEEE 802.11g 11Mbps Auto-fallback IEEE 802.11b
Interfaces/Ports	1 x RJ-45 100Base-TX
Additional Information	1 x Reset Button Cabling Type: UTP CAT 5 RAM: 32 MB System Flash Memory: 8 MB Compatibility: Web-based configuration using Java-enabled web browser Operating Modes: Access Point Point-to-Point Bridge Point-to- Multipoint Bridge Repeater Minimum Requirements: 802.11b or 802.11g Wireless Adapter with TCP/IP Protocol Installed per PC Network Adapter with Ethernet Network Cable and TCP/IP protocol installed per PC AC wall power or Switch/Router with Power over Ethernet (PoE) support or POE injector
Standard Warranty	3 Year Limited