Connect this 2.4GHz Outdoor Directional Antenna
to any of your Outdoor Wireless Access
Points. This 2.4GHz Antenna works great
for connecting two locations wirelessly, sharing
data, or using a VoIP wireless link. With
the appropriate coax cable (not included) you
will be able to connect this 2.4GHz antenna to
any Linksys, Cisco, D-Link, Netgear, ZyXel or
other Wireless Access Point for increased signal
strength. Add a network amplifier, or
signal booster to further increase your Wi Fi
network range.
Use this antenna if you would like to create a
Wireless Bridge between your two locations up to
3 miles apart, with great accuracy.
|
Please note:
Typical
Wireless Range will be dependent on the
following:
| |
- Transmit Power of your
Access Point or Wi Fi Router
- Outdoor Obstructions
(trees, lakes, buildings,
RV's, hills, etc.)
- Type of building
material (metal, aluminum,
wood, sheetrock)
- Mounting position of
antenna
- dBi Gain of the outdoor
antenna
- Length of coax cable
connected to the antenna
- Client device receive
sensitivity, and transmit
power
|
The stronger the transmit power of the
access point, the better your wireless
signal will carry, and provide a more
enjoyable Internet surfing experience
for your customers. The Transmit
Power on typical Linksys, Dlink and
Belkin Wireless Access Points/Routers,
is usually in the 15dbm range, or 32mW
Transmit Power. This means that
connecting a high gain antenna will help
your range, but will not provide the
increased distance and signal strength
that say a 200mW, or even 500mW Access
Point will provide. To get the
best range from your outdoor antenna,
please ask us about upgrading your
Linksys or D-Link Access point.
|
 |
 |
3 mile
Outdoor Range (Pt. to Pt.)
GNS-1413
