Mimosa B5-Lite | 5 GHz, 750+ Mbps capable PtP 802.11AC - COMPLETE Link

Manufacturer: Mimosa
Part #
MFG Part # B5-Lite
Availability In Stock
Price $418.00

5GHz - 750+ Mbps PTP Backhaul Radio, 20dBi Antenna

Product Info

Mimosa B5-Lite 5GHz - 750+ Mbps PTP Backhaul Radio, 20dBi Integrated Antenna.

This 802.11AC wireless backhaul radio is a complete link in a box. Introducing the Mimosa B5-Lite, your next low-cost, high throughput backhaul radio. Using Mimosa's flexible TDMA protocol and 802.11ac technology, this 2x2:2 radio is a great option for locations that do not require collocation. Capable of 750+ Mbps throughput, this radio can serve less bandwidth hungry areas easily. Offering the same low 2 ms latency as the B5 and a 20 dBi antenna - the B5-Lite strips away a few advanced B5 features to provide you with an alternative low-cost solution. The Mimosa B5-Lite point to point wireless ethernet bridge is a fantastic addition to any network.

These lightweight antennas create a point to point wireless Ethernet bridge. These wireless backhaul radios have a radio throughput of up to 750Mbps, using a small, lightweight, 20dBi integrated antenna. Only a single Cat5e Ethernet cable is required for both power and data over the same cable.

Solar Power
These wireless bridge radios deliver up to 750Mbps using a maximum of 20W power consumption, per radio.  These means that providing solar power is fast and simple, and no large solar panels are required. 

Channel Width
With channel width up to 80MHz, this wireless bridge can support VoIP, Video, and large amounts of data transfer, with minimum lag, and zero latency.  Up to a 2 mile point to point internet distance at maximum throughput.  Channel width automatically adjusts depending on the interference of your wireless point to point link. This means that in poor conditions, your wireless backhaul radio will automatically adapt to the best channel, channel width, and transmit power to keep your link running at optimum speed.

Stream Power Peaking
Multi-stream MIMO radios normally settle on the lowest MCS rate across all the streams, severely degrading performance. Mimosa’s wireless backhaul radios constantly advise the remote-side radio of individual stream receive levels, increasing those signal levels to meet the highest common attainable MCS rate.

Predictive AGC
When there’s a consistent signal from a single client, Mimosa’s Automatic Gain Control narrows the gain window of the receive signal amplitude for the next incoming packets to accelerate packet signal level detection.  This further reduces latency, and maximizes link quality.  This wireless bridge works very well in high interference envirnments.

Precision Receive Activation
A technique by which the receiver is precision-activated only when packets are expected to arrive over the link. Thus reducing the potential interference typically seen if a receiver prematurely begins decoding.  With this technology your wireless bridge will have less dropped packets, which results in faster throughput, less jitter, and a higher quality point to point wireless connection.

Back to Top

Mimosa B5-Lite Production Firmware can be found here.

Back to Top
Add'l Info
Max Throughput 750+ Mbps
Low Latency Configurable 5ms+
Wireless Protocols Auto-TDD/TDMA
MIMO & Modulation 2x2:2 MIMO OFDM up to 256 QAM
Bandwidth* 20/40/80 MHz channels tunable to 5 MHz increments
Frequency Range 4900-6000 MHz restricted by country of operation (*new* US/FCC 5600-5650 support)
Max Output Power 23 dBm
Sensitivity ( MCS 0 ) -87 dBm @ 80 MHz
-90 dBm @ 40 MHz
-93 dBm @ 20 MHz

Gain 20 dBi
Beamwidth ( 3dB ) 14° (azimuth and elevation)
Cross-Polar Isolation >20 dB
Polarization Dual 45° slant polarization
Max Power
15 W
System Power Method 802.3at compliant
PoE Power Supply Passive POE compliant, 48-56 V Power over Ethernet supply with IEC61000-4-5 surge protection

Dimensions Width: 153.31 mm Diameter: 260.33 mm
Weight 0.72 Kg
Outdoor UV stabilized plastic
Wind Survivability 200 km/h (125 mph)
Wind Loading 39 kg @ 160 km/h (86 lbs @ 100 mph)
Mounting Single pole strap feed point integrated into plastic back plate with integrated curvature for contact with mounting poles. Azimuth and Elevation adjustability only provided via J-mount elevation adjustment and hose clamp loosened rotation on the pole.

-40°C to +55°C (-40°F to 131°F)
Operating Humidity 5 to 100% condensing
Operating Altitude 4420 m (14500') maximum
Shock & Vibration ETS 300-019-2-4 class 4M5

Regulatory + Compliance
Gigabit Ethernet 10/100/1000-BASE-T
Mimosa cloud monitoring and management SNMPv2 & Syslog legacy monitoring HTTPS HTML 5 based Web UI
Smart Spectrum
Active scan monitors/logs ongoing RF interference across channels (no service impact)
Dynamic auto-optimization of channel and bandwidth use
Security WPA2 + Mimosa 802.1x Client
QoS Supports 4 pre-configured QoS levels
Approvals* FCC Part 15.407and Part 90Y, IC RSS210, CE,
ETSI 301 893/302 502
RoHS Compliance Yes
Safety UL/EC/EN/ 60950-1 + CSA-22.2
Back to Top