2.4GHz 4W, Outdoor POE, Tunable Amplifier

Manufacturer: RF Linx
Part #
GNS-1450
MFG Part # GNS-1450
Availability Contact Us
Price $849.00
2.4GHz 4W, Outdoor POE, Tunable Amplifier
Product Info
Achieve the high performance of our 2400LT series Tunable Antennafier™ with POE. This fully tunable Bi-Directional Amplifier provides a system integrator a cost effective outdoor POE solution. Now you can power your amplifier using a single CAT-5 line and eliminate the high RF losses associated with coaxial cable. Improve your link margin digitally with spectrally clean TX Output Boost from 0.5W to 4W and highly selective RX gain from 5 to 20dB. By using the integrated PoE feature of this amplifier, you will be able to mount your Access Point outdoor, and connect an amplifier inline with an updated PoE device. The cat5 cable will connect from your PoE unit located indoors, and connect to the amplifier. You will then connect the cat5 cable from the amplifier to the outdoor access point. From the access point, a short coax cable will connect the RF output NF connector to the NF connector on the amplifier. You will then connect the outgoing RF connector on the amplifier to the High gain antenna. This will not only increase your transmit power, but also increase your receive sensitivity for the access point. For users that are on the brink of connecting to your access point, an outdoor amplifier is what you need. Back to Top
Add'l Info

This Outdoor 1 watt Power over Ethernet, PoE,  802.11b/g amplifier is designed for 802.11b/g Wireless Network Installations.  Designed for extending the range of 2.4GHz Wireless Radio devices, the outdoor PoE amplifier is particularly effective when used with Direct Sequence or Frequency Hopping Spread Spectrum radio modems.  This Outdoor unit provides transmit power amplification and receives signal gain.

 

By using the integrated PoE feature of this amplifier, you will be able to mount your Access Point outdoor, and connect an amplifier inline with an updated PoE device.  The cat5 cable will connect from your PoE unit located indoors, and connect to the amplifier.  You will then connect the cat5 cable from the amplifier to the outdoor access point.  From the access point, a short coax cable will connect the RF output NF connector to the NF connector on the amplifier.  You will then connect the outgoing RF connector on the amplifier to the High gain antenna.  This will not only increase your transmit power, but also increase your receive sensitivity for the access point.  For users that are on the brink of connecting to your access point, an outdoor amplifier is what you need.

 

Applications:

  •  
  • 2.4GHz Systems
  • High Cable Loss Installations
  • Harsh Environment Installations
  • Tower Top or Enclosed Installations
  • Point to Point or Hot Spot Installations

 

Full output power of 1 Watt  is achieved with only 5mW input to the amplifier.  Above 5mW input, the SmartAmp attenuates the input signal power and maintains the output power typically at 1 Watt.

 

If you are unsure if this amplifier will work in your Wireless Network Installation, please contact us to discuss.

Please review and obey all FCC part 15 rules and regulations with regards to installation of WiFi amplifiers.  Only network professionals should be installing 802.11 network amplifiers
Back to Top