2.4 GHz

2.4 GHz Wireless Amplifiers


2.4ghz wireless amplifiers are designed for extending the range of 2.4 GHz wireless radio devices, which is particularly effective when used with Direct Sequence or Frequency Hopping Spread Spectrum radio modems/access points/wireless routers. The amplifier provides the transmit power amplification as well as receive signal gain.  2.4ghz wireless amplifiers are easy to install, and connect to most every wireless router, or access point with a removable antenna to increase both speed and wireless distance.
 
<<1 2>>
products per page:
Luxul Wi-Fi Signal Booster, 1000mW, 802.11b/g/n Indoor Amplifier, 2.4GHz

Luxul 2.4GHz, Indoor Amplifier, Wi-Fi Signal Booster, 1000mW

Part #: GNS-1460

MSRP: $399.00 Price: $219.99

12-207RFW SmartAMP 2.4GHz 5W Amplifier with AGC

12-207RFW SmartAMP 2.4GHz 5W Amplifier with AGC

Part #: 12-207RFW

MSRP: $1,024.00 Price: $989.00

12-208RFW SmartAMP 2.4GHz 8W Amplifier with AGC

12-208RFW SmartAMP 2.4GHz 8W Amplifier with AGC

Part #: 12-208RFW

MSRP: $1,280.00 Price: $1,055.00


12-209RFW SmartAMP 2.4GHz 10W Amplifier with AGC

12-209RFW SmartAMP 2.4GHz 10W Amplifier with AGC

Part #: 12-209RFW

MSRP: $1,600.00 Price: $1,255.00


12-213, 2.4GHz 1000mW, Indoor Amplifier

2.4GHz , 1000mW Indoor Amplifier

Part #: 12-213

Price: $229.00



12-231, 2.4 GHz 500mW, Indoor Amplifier

2.4 GHz 500mW, Indoor Amplifier

Part #: 12-231

Price: $240.00


12-534, 2.4GHz 3W, Full Duplex Amplifier

12-534, 2.4GHz 3W, Full Duplex Amplifier

Part #: 12-534

Price: $5,389.00

12-207, 2.4GHz 5W, Outdoor Amplifier

12-207, 2.4GHz 5W, Outdoor Amplifier

Part #: 12-207

Price: $1,395.00

12-209, 2.4GHz 10W, Outdoor Amplifier

12-209, 2.4GHz 10W, Outdoor Amplifier

Part #: 12-209

Price: $1,499.00


<<1 2>>
products per page:
Teletronics SmartAmp
GNS Wireless stock 2.4ghz wireless amplifiers from top manufacturers such as Luxul, Teletronics, RF Linx and others.  For example, the Teletronics built-in dynamic power sensor in their SmartAmp™ series of 2.4ghz wireless amplifiers adjusts the Radio Frequency (RF) power output level by reading the input signal power.  This Automatic Gain Control (AGC) Technology, is Teletronics patented technology, effectively making the RF amplifiers "Plug & Play".  This allows the signal boosters to deliver the maximum output power at various input levels while keeping the distortion at a minimum.
 
Tactical Signal Booster           
Luxul’s Tactical Signal Booster (TSB) is designed for use in mobile and/or mesh wireless networking applications.   This type of 2.4ghz wireless amplifier implements the same patented Signal Booster technology contained in Luxul’s Tactical Mesh Antenna (TMA), while allowing for the use of virtually any antenna that supports the specified frequency range.  The Signal Booster construction is highly durable and water resistant for outdoor applications, while the small footprint and low profile design makes it an ideal solution for mounting on vehicles or in other space constrained applications.
 

High power Bi-directional Amplifiers

GNS Wireless stocks 2.4ghz wireless amplifiers anywhere from 250 mW to 10 Watt, 2.4 GHz 802.11g (b/g/n) Wi-Fi Indoor Bi-directional Amplifiers with Active Power Control and built-in Power-Over-Ethernet (PoE) Interface.  GNS Wireless also carries high power, military grade 2.4ghz wireless amplifiers that have up to 20 & 30 Watt transmit power, at 2.4 GHz 802.11b only Wi-Fi Indoor and Outdoor Bi-directional Amplifiers with Active Power Control.  Please contact us directly for more information on these high power 2.4ghz wireless amplifiers.
 
Increasing the output power and receive gain of your 802.11N or Mimo router, access point or even internal wireless card is now easier than ever.  For a quick boost in wireless performance, ask us about our new 1000mW amplifier, which will drastically boost any 802.11N or Mimo router with detachable antennas.   It is also backwards compatible with B and G for greater performance to all Wi-Fi Cards for 2.4Ghz.  This 2.4ghz wireless amplifier comes standard with N-Type female connectors, which with the correct coaxial cable, will connect to any wireless access point.
 
These wireless amplifiers are FCC compliant with low gain 802.11 antennas installed and should be used with the recommended rubber duck antennas.  These amplifiers will significantly improve link reliability and operating range by providing low noise amplification during receive, and spectrally clean power amplification during transmit. 
 

2.4GHz wireless amplifier Features:


  • Up to 30W bi-direction Booster designed for 2.4GHz antenna equipment.
  • Comes with an easy plug-and-play installation, which works together with an Wireless Access Point to improve its operation range and performance.
  • The amplifiers increase range by providing transmit gain as well as low-noise receive gain.
  • IEEE 802.11b/g/n compatible