The Ubiquiti Nanobeam airMax AC Bridge Gen2 is an outdoor rated 802.11AC access point with built in, integrated directional antenna for point-to-point wireless bridge.
Incredible Antenna “Beam” Performance
The form factor of the NanoBeam® AC features the highest gain for its size. The NanoBeam AC’s excellent beam directivity provides the best performance in high-noise environments.
Ubiquiti’s airMAX® engine with custom IC dramatically improves TDMA latency and network scalability. The custom silicon provides hardware acceleration capabilities to the airMAX scheduler, to support the high data rates and dense modulation used in airMAX ac technology.
Plug and Play Installation
The NanoBeam® AC mounts to a variety of surfaces including poles or walls, and offers the freedom of three-axis alignment. No screws are required for pole-mounting, and only a single wall screw (not included) is required for wall-mounting.
This radio includes a seperate wireless management radio for configuration and troubleshooting, wirelessly. This avoids the need to hardwire into the radio, meaning you do not need to gain access to the switch, or POE for direct connection.
Professional setup and configuration is available for plug-n-play installation on your network. Contact GNS Wireless today.
Here are the specifications for the Ubiquiti NBE-5AC-Gen2 wireless access point:
- Processor: MIPS 74Kc
- Memory: 128 MB DDR2
- Networking Interface: 1 x 10/100/1000 Ethernet port
- Power Supply: 24V, 0.5A Gigabit PoE adapter (included)
- Power Method: Passive PoE (Pairs 4, 5+; 7, 8 Return)
- Gain: 19 dBi
- Operating Frequency: 5 GHz
- Wi-Fi Standards: 802.11a/n/ac
- Maximum Power Output: 26 dBm
- Maximum Power Consumption: 8.5W
- Dimensions: 257 x 84 x 30 mm (10.12 x 3.31 x 1.18 inches)
- Weight: 0.4 kg (0.88 lb)
- Wind Survivability: 200 km/h (125 mph)
- LEDs: (1) Power, (1) LAN, (4) WLAN
- ESD/EMP Protection: ±24kV Contact/Air
- Operating Temperature: -40 to 70° C (-40 to 158° F)
- Operating Humidity: 5 to 95% Noncondensing
- Certifications: CE, FCC, IC
The NBE-5AC-Gen2 is designed for outdoor deployment and is suitable for point-to-point (PTP) and point-to-multipoint (PTMP) applications. It features a rugged and weatherproof design, making it suitable for use in harsh outdoor environments. It also comes with Ubiquiti’s airOS software, which provides a variety of advanced features such as wireless settings, device configuration, and management tools.