60 GHz, Interference Free, Gigabit PTP Ethernet Bridge
Connect any 2 locations wirelessly up to 1/4 mile away with this Gigabit Point to Point Wireless Bridge. Avoids all 2.4 GHz and 5 GHz Wi-Fi interference.
*NEW* Low-cost, Very high throughput, 1000+ Mbps, wireless bridge point to point radio using 60 GHz License Free, Interference Free technology. These radios are a great option for short to medium range, point to point and building to building wireless connections. Capable of 1000 Mbps throughput on the 60 GHz radio, with failover to 5 GHz 500Mbps, this 802.11AC point to point bridge can serve less bandwidth hungry areas easily. Share remote Internet connections, files, video, voice, and application servers with minimal latency and maximum uptime. Zoom Calls in a remote building, PTZ camera access to remote offices, and high throughput applications are now available using this small form factor SET of antennas.
60 GHz radio link means less down time even in areas where saturated 5 GHz and 2.4 GHz wireless networks are present. For less than optimal 60 GHz environments, the link will automatically failover to a 5GHz point to point connection to maintain the integrity of your wireless communication.
- 60 GHz radio with 5 GHz radio backup
- Low-interference 60 GHz spectrum
- Up to 1+ Gbps with low latency WLAN connectivity
- Optional 2.4 GHz management radio
- 2000 MHz channel width support at 60 GHz connectivity
- Small form factor (Antennas are 5″ round)
- Pre-Configured for out of the box “plug-n-play” installation
- USA Technical Support included
What’s included in this 1000 Mbps Gigabit Wireless Ethernet bridge (complete link):
2x Outdoor 60 GHz 802.11AC Bridge Antennas
2x Gigabit Power over Ethernet Injector (24V PoE)
2x 50ft. Shielded cat5e Ethernet Cable
2x Pole Mount Hardware for 1-2″ OD mast
2x Inline Surge Protectors
This 60 GHz Point to Point Wireless Bridge is pre-configured and paired to each other, for “out of the box” installation and operation. Operating at 60 GHz gives you an interference free wireless communication between any 2 buildings, that are less than 1/4 mile distance, and have clear, unobstructed LOS (Line of Sight). Easily connect remote IP cameras up to 1000ft. Connect any 4K camera with zero latency, and full FPS, as this link supports 2000MHz channel width for the lowest latency connection.
External Signal LED’s will assist with alignment and troubleshooting procedures. Maximum cat5e cable to be used on each end is 250ft. (Shielded cat5e is recommended). 1 year warranty includes USA technical support from GNS Wireless.
This complete 60 GHz Point to Point Wireless Bridge package requires no external software. Unifi software not required. Gigabit speeds outperform UBB-US with accessible IP addresses for web management.
This is a great replacement to any Trendnet or Engenius plug-n-play solution that is not currently working. Higher power, zero interference, and out of the box installation.