Configuring the Nomadix EG3000 DHCP server can be a bit technical, but with the following steps, you should be able to get it up and running in no time:

  1. Connect to the EG3000: Connect a computer or laptop to the EG3000 via Ethernet cable and open a web browser. Type in the default IP address of the EG3000 (192.168.1.1) into the address bar and hit Enter.

  2. Login to the EG3000: Login using the default login credentials (admin/admin). If you have changed the login credentials, use the new ones.

  3. Configure the Basic Network Settings: On the home screen, click on the “Configuration” tab, then “Basic Network Settings.” Enter the IP address, subnet mask, and default gateway for the EG3000.

  4. Configure DHCP: On the “Configuration” tab, click “DHCP Settings” and select “Enable DHCP Server.” Here, you can configure the DHCP settings, such as the start and end IP addresses, subnet mask, and lease time.

  5. Configure DNS: On the “Configuration” tab, click “DNS Settings” and select “Enable DNS Server.” Here, you can configure the DNS settings, such as the primary and secondary DNS server addresses.

  6. Configure NTP: On the “Configuration” tab, click “Time Settings” and select “Enable NTP Client.” Here, you can configure the NTP settings, such as the NTP server address and time zone.

  7. Save Changes: Once you have made all the necessary changes, click “Save” to apply the settings.

  8. Reboot: Finally, reboot the EG3000 for the changes to take effect.

In conclusion, configuring the Nomadix EG3000 DHCP server requires logging into the device, configuring basic network settings, enabling DHCP, DNS, and NTP settings, and saving and rebooting the device. By following these steps, you should be able to successfully configure the Nomadix EG3000 DHCP server.

Please note:  The default IP address for Nomadix gateways is usually 192.168.1.1. However, the specific default IP address may vary depending on the model and configuration of the Nomadix gateway. It’s always recommended to check the device’s user manual or contact Nomadix support for the exact default IP address of your specific device.

Leave a Reply